Outdoor led flood lights – Outdoor motion sensor outdoor led flood lights are a way to add security and peace of mind for your home. Because they are an external product, you may run into the problem of flood lights do not turn off at all. There are a few little things you can check to determine why the floodlights not be turned off.
Point the remote at flood lights and press the “Off” command if your light has a remote control device. Sometimes a remote gets accidentally pushed into the position “On”. If this was the problem, the light turns off within five minutes. Adjust the bulb installations bit away from the sensor. Sometimes the light from flood bulbs will activate the sensor. You can adjust most flood lamps by pushing them in and out. Dry the sensor with a soft cloth to remove any dirt that may cause the sensor to activate. Look at the light bulbs you use in outdoor led flood lights. Adjust the range of the sensor flood lights. Sometimes the interval is set too wide, and everything sets off the sensor. Loosen the screw holding the sensor to the rack, and adjust the sensor to decrease the range.
12 Photos Gallery of: Mine Outdoor Led Flood Lights Will Not Turn Off
Make adjustments to the sensitivity of the sensor. There will be a small cap or elsewhere on the body of the floodlight. Slide the cover with your thumb and check sensitivity adjustment screw. Turn the screw in small steps towards the “Min” with a flat screwdriver and wait for the timer to turn off the light. Put the cover back on the body of flood lights. Walk in front of outdoor led flood lights motion sensor after dark. If the wall switch that operates the system was turned off while the lights were turned on and then turned back on in the daytime, the lights will stay on until the sensor is reset. The only way to reset the sensor is wait for sunset and passes in front of the sensor. The lights will reset and off.