Bathtub shower combo -Tub and shower walls are one of the most common types of shower / tub in use across the nation.
Remove the old tub from the enclosure so you can begin construction of the bathtub shower combo. Turn off the water to the house. Use appropriate tools to remove the drains, faucets and other accessories in the bathtub. Cut the seams around the base of the tile wall with a utility knife, and remove the bath. Use force if necessary, as some tubs can be difficult to remove. Remove all of the design for the old tub, as well as the old tiles that line the walls. Use a hammer to drive the design of the old tub out. Remove utility knife, and then score the plaster on the outside of all tile edges. Work your way from the ground and pry the old plaster tiles framing. Bring walls down to the studs. Cover the bathtub shower combo walls with a suitable water-ranked substrate, such as waterproof plaster. Cut the new substrate with the utility knife to fit into that old plaster and tiles. Screw the new surface in place with the drill and screws. Put Sink the screws just below the surface of the plaster and cover all screw holes with silicone.